Wir freuen uns, Sponsor des diesjährigen Future Mobility Cups (FMC) zu sein. Studententeams von fünf technischen Hochschulen entwickeln im Rahmen des FMC während fünf Monaten Algorithmen für Fahrzeuge im Maßstab 1:8, die mit State-of-the-Art Sensorik (Lidar, Kameras, Ultraschall) und Software der Fahrzeugindustrie ausgestattet sind. Im Rahmen eines spannungsgeladenen Rennens treten im Frühjahr 2020 die Teams gegeneinander an und es wird hierbei der Cup-Sieger ermittelt.

Der Cup wurde initial von der FH-Wels, KTM Technologies und Heinz Hollerweger ins Leben gerufen und wird von der ICM sowie dem Automobil-Cluster unterstützt. Vier Hochschulen treten in Modellautos im Maßstab 1:8, welche mit neuester Sensortechnologie ausgestattet sind, in einem autonomen Rennen gegeneinander an.

Autonomous race in model cars on a scale of 1:8

Wir laden zusammen mit dem Cup-Hauptsponsor Candera und dem Rotax MAXDome herzlich zu einem spannenden Renntag ein.

Agenda

ab 12:45
Eintreffen und Registrierung der Teilnehmer

13:00-17:00
Future Mobility Cup

17:00-17:15
Siegerehrung

17:15-20:00
E-Kartfahren & Networking, gemütlicher Ausklang

Anmeldung und mehr Informationen gibt es hier.

As a leading international world fair with its exclusive focus on embedded technologies, the Embedded World Exhibition & Conference reflects the main trends of the sector. From 25th to 27th February, 2020 more than 900 exhibitors from all over the world showcased their products and services at the exhibition center in Nuremberg/Germany. Unfortunately, the corona situation also affected this fair resulting in a reduced overall number of visitors at the exhibition. However, especially on the second day the attendance of the Candera booth was quite good with high quality leads within the automotive, industrial and home appliances sector.

Candera was presenting a mix of innovative HMI solutions and technologies in the area of embedded HMI design – with novelties in the automotive and home appliances solutions. Highlights at the Candera booth were the „Holi Cluster & IVI Solution” and a newly developed Smart Oven UI.

Candera’s HMI solutions based on different targets like Kirin 960s (Android), NXP, Intel, Cypress and TI (from the left)

Candera’s smart oven user interface with scan & bake app

Smart Oven User Interface

Based on CGI Studio Candera has developed an Android-based smart oven user interface. This full digital UI (with baking and cooking function) of a next generation’s oven, is not only particularly user-friendly and appealing, but has been expanded by a smart Scan & Bake app.The app installed on a conventional smartphone enables to scan the barcodes on the back of common food packaging (e.g. frozen product packaging for pizza, lasagna, etc.) and to transmit this data directly to the oven UI. After one scan the user can directly start the baking process or adjust the settings according to his/her personal choice. The advantage for the user is obvious: this smart UI-interface is particularly user-friendly and enables a quick and easy handling.

Functional safety, hypervisor and augmented reality

Additionally to the Holi HMI Candera was showcasing solutions based on innovative technologies like hypervisors, functional safety and augmented reality.

As a leading international world fair with its exclusive focus on embedded technologies, the Embedded World Exhibition & Conference reflects the main trends of the sector. From 25th to 27th February, 2020 more than 900 exhibitors from all over the world showcased their products and services at the exhibition center in Nuremberg/Germany. Unfortunately, the corona situation also affected this fair resulting in a reduced overall number of visitors at the exhibition. However, especially on the second day the attendance of the Candera booth was quite good with high quality leads within the automotive, industrial and home appliances sector.

Candera was presenting a mix of innovative HMI solutions and technologies in the area of embedded HMI design – with novelties in the automotive and home appliances solutions. Highlights at the Candera booth were the „Holi Cluster & IVI Solution” and a newly developed Smart Oven UI.

Candera’s HMI solutions based on different targets like Kirin 960s (Android), NXP, Intel, Cypress and TI (from the left)

Candera’s smart oven user interface with scan & bake app

Smart Oven User Interface

Based on CGI Studio Candera has developed an Android-based smart oven user interface. This full digital UI (with baking and cooking function) of a next generation’s oven, is not only particularly user-friendly and appealing, but has been expanded by a smart Scan & Bake app.The app installed on a conventional smartphone enables to scan the barcodes on the back of common food packaging (e.g. frozen product packaging for pizza, lasagna, etc.) and to transmit this data directly to the oven UI. After one scan the user can directly start the baking process or adjust the settings according to his/her personal choice. The advantage for the user is obvious: this smart UI-interface is particularly user-friendly and enables a quick and easy handling.

Functional safety, hypervisor and augmented reality

Additionally to the Holi HMI Candera was showcasing solutions based on innovative technologies like hypervisors, functional safety and augmented reality.

As a leading international world fair with its exclusive focus on embedded technologies, the Embedded World Exhibition & Conference reflects the main trends of the sector. From 25th to 27th February, 2020 more than 900 exhibitors from all over the world showcased their products and services at the exhibition center in Nuremberg/Germany. Unfortunately, the corona situation also affected this fair resulting in a reduced overall number of visitors at the exhibition. However, especially on the second day the attendance of the Candera booth was quite good with high quality leads within the automotive, industrial and home appliances sector.

Candera was presenting a mix of innovative HMI solutions and technologies in the area of embedded HMI design – with novelties in the automotive and home appliances solutions. Highlights at the Candera booth were the „Holi Cluster & IVI Solution” and a newly developed Smart Oven UI.

Candera’s HMI solutions based on different targets like Kirin 960s (Android), NXP, Intel, Cypress and TI (from the left)

Candera’s smart oven user interface with scan & bake app

Smart Oven User Interface

Based on CGI Studio Candera has developed an Android-based smart oven user interface. This full digital UI (with baking and cooking function) of a next generation’s oven, is not only particularly user-friendly and appealing, but has been expanded by a smart Scan & Bake app.The app installed on a conventional smartphone enables to scan the barcodes on the back of common food packaging (e.g. frozen product packaging for pizza, lasagna, etc.) and to transmit this data directly to the oven UI. After one scan the user can directly start the baking process or adjust the settings according to his/her personal choice. The advantage for the user is obvious: this smart UI-interface is particularly user-friendly and enables a quick and easy handling.

Functional safety, hypervisor and augmented reality

Additionally to the Holi HMI Candera was showcasing solutions based on innovative technologies like hypervisors, functional safety and augmented reality.

Candera opens new branch office in North America
Sales Director of Candera America is 2D/3D and Extended Reality (XR) expert David Pollock

Linz, Austria and Southfield, Michigan, USA December 1, 2019 — Candera Gmbh in Linz, Austria, is excited to announce the opening of Candera America Inc., a new branch office in the greater Detroit area, North America. David Pollock named Sales Director of Candera America whose responsibilities will initially include business development, sales and operations.

HMI design tool and services provider Candera GmbH has established their North American office in the Detroit area, due to the regional and national HMI demands. The increasing sales of premium cars in the U.S. and growing customer preference for automotive HMI features, North America is projected to hold the fastest growth in automotive human machine interface (HMI). Similar trends are showing up in verticals like the home appliance, recreational vehicles and agriculture sectors.

Sales Director of Candera America, David Pollock, at the new branch office in Southfield, MI

“Our new branch office in the Detroit area will cover the rise in demand for enhanced user experience and convenience features in the North American automotive, industrial and consumer products industries, “ says Reinhard Füricht, Managing Director of Candera. “David is the perfect fit to guide Candera’s growth as a leading HMI tool provider in the North American market”.

With over 20 years’ experience in enterprise 3D, emerging technologies within automotive and industrial applications, Pollock began his career with Delphi and was an early adopter of computer-aided design (CAD) software for manufacturing. David has supported or established three global technology company launches in North America. Experienced in self-funded start-ups and Silicon Valley funded technology companies supporting vertical markets that include Automotive, Aviation, Defense, Telecommunications and Consumer Products.

The new office will be the base for supporting the OEMs, Tier1s and Partners for Candera’s Embedded HMI software CGI Studio, Collaboration and HMI Services.

Sales Director of Candera America, David Pollock

Candera America Inc.
David Pollock
21415 Civic Center Drive, Suite 100
Southfield, MI 48076
david.pollock@candera-hmi.com
www.candera-hmi.com

About Candera

Candera, is a leading HMI tool provider and development partner for worldwide automotive, consumer products and industrial customers. Candera supports its customers with the CGI Studio tool environment as well as provision of software services mainly in the areas of HMI development and embedded software. Candera GmbH in Linz/ Austria, Candera America and Candera Japan Inc. in Shinjuku-ku, Tokyo / Japan are part of the ArtSpark Group situated in Shinjuku-ku, Tokyo / Japan.